Spurts

  
   It seems like I accomplish models in spurts. Several get done in a short period of time and then long periods of drought between. Well here's hoping this is the start of a spurt. I've been working out of state with my youngest son all summer. The will be a hiatus for a few short months and then I'm back down to work in Penna. again for a much shorter time. Hopefully, it will be back to Maine for good when I'm finished down there sometime in the early spring. Suffice it to say, I get no modeling done down there.
   So here's a piece just finished in my first three days back at the bench. No not continuously for three days. The '37 Chevy from Sylvan has been a favorite of mine and I've built quite a few now. This is the second wrecker I've done with the '37 and I changed the look a bit with this one by adding the fendered bed. The boom is also scratch built and I placed the Jordan wheels on it. The grille has been Bare Metal Foil-ed and the paints are Floquil Rail colors. A very light coat of clear flat lacquer dulled it up and a few washes were done. A very light dusting with artists chalks finish it.
    Short but sweet this time, thanks for looking.

Up close

Unfortunately my Sony Cybershot died this last week. It turned out to be a blessing in disguise. Although financially I really wasn't prepared to shell out the money for the camera I wanted, I happened on one ebay auction that nobody seemed to be paying much attention to. What retails for just under $300 I picked up for $136, a Canon Powershot 300HS. I am truly impressed right out of the gate with it's ability to take very close macro shots. It does however have the unnerving drawback of a bad field of focus in macro but whose doesn't in a point and shoot camera? It also does very well in low light conditions. Something the Sony was entirely void of. Well my camera expertise is also sorely lacking so let me show you how well it really does do. The photo above is from a model you might remember from a few posts back. The Mack LJSW in a solid resin cab from Sheepscot that I did into a logger. It shows the detail of the logging bunks and something else you cannot see in any of the photos previously taken with the other camera, the diamond plate steps that I used to replace the resin ones. I urge you to click on the photos to see the enlarged photos for all the one's I'm showing here.




The photo of the Ford Model TT above is an example of what this camera can do under low light conditions. It is 7:30 pm on a very cloudy night in June and there is barely enough light to see where one was walking. And to add to the darkness, the model has been placed in the barn diorama which shields it from the light coming from the very small window in my office with the exception of what is coming through the even smaller windows of the diorama. Proof that the camera can see more than the naked eye. By the way, the Ford is something new, here's another photo of it.




I don't even know why I'm showing this one except that it does give a really fine example of how finely detailed Roco does things. The truck is a Kenworth C500DA oil field heavy hauler from Dennis Aust models that is put on the Roco chassis from a ten ton wrecker. The off road tires are from Roco too on Promotex rims that I altered to make them planetary.



Here's one last shot for this post that is again of the TT wrecker. The small tool box is made from brass shim stock and the inside is filled with VectorCut wrenches. Thanks for looking, enjoy. And give your kids a hug.

Back to stay

Yes, I think I'll keep doing this modeling thing. A few more recent pieces here. Starting with an old favorite, the '37 Chevy truck from Sylvan Scale. Pretty much box stock (no alterations done to the model.) except for using the Jordan 5 hole steel wheels. The covered livestock hauler in behind is a resin kit from the German outfit Kniga. I did lower the suspension a bit and used a two hole steel wheel on the trailer. I also covered the tarp that was already molded in the resin casting, with tissue. Just helped to make the seams at the glue joint less perceptible.

















Sometimes you run across a model that is just too much like a toy. Such is the case with the Imex International KB8 from 1947-49. It is a diecast piece with a very thick paint job and plastic headlights that are mounted on the bumper. To creat this piece, I shortened the wheelbase and corrected the windshield area. I then used some appropriate headlamps and mounted them up on the fender where they belong. The wrecker unit is scratch built and sits on diamond plate. The wheels are from Athearn. After stripping all the paint off, I cleaned the casting and dipped it in Blacken-It. A chemical product that darkens most metals. This eliminates any coats of paint at all and provides a good tooth for anything that does get painted without priming.
















I do feel fortunate to have friends like Ralph Ratcliffe. Ralph is the renowned modeler responsible for countless numbers of masters for models brought to us by the likes of Sheepscot Scale and Don Mills Models as well as carrying his own line of great models now. I was the recipient of the Mack F700 cabover from Ralph because it had some defects and he could not sell it to Don Mills who markets the kit. With just the cab in hand I found a Promotex chassis suitable and put Ralph's wheels on it with his cab. The trailer is the Lonestar kit of the Trailmobile 40 ft. flatbed. A great kit for scale and prototypical accuracy but a bit of a bugger to assemble with all the fiddly little parts. Not impossible by any means but if you're just starting out in modeling, you might want to put this one on the shelf until you sharpen your skills a bit. The load is an old plastic kit from Preiser of a generic forage wagon chained down to the trailer .
















The last thing I want to show for this posting is the trailer I originally intended for the Mack F700. It is a 28' wedge from Rail Power offered in a plastic kit. Of course I can always change my mind again.




Well thanks again for looking and happy modeling.

Back at it

I was told that getting back into the things I love to do is a great therapy so I forced myself to sit down at the bench and broke out some old kits. It feels very good to create again after so long.

My first venture into the long trip back to anything resembling normalcy was the old Model AA Ford from Jordan Miniatures. I have an issue with the roof not being prototypical on this model but otherwise it's a fine kit. I combined it this time with parts from a Tichy wooden ore car kit to make a coal delivery truck. The bed (supposedly) has a screw auger dispensing system and I scratch built a geared gate for it. The 'coal' is fine granite dust sprayed black. Did some heavy weathering here on the truck.

















I moved on to another old favorite in the Roco Zis-5 again and combined it with the tank from the Model AA kit. Added a bunch of scratch built details to come up with this Airport Fuel delivery truck. The (as yet unfinished) plane in the background is a 1938 Corben Super Ace which comes in a plastic kit from Williams Bros. Not a very detailed kit but it is one of the few aircraft models that scales to an exact 1/87.





















This truck sat unfinished for the longest time. I knew where I wanted to go with it but didn't know how to get there exactly. The model is a cast metal kit from the now defunct Ivers Engineering of the 1953 REO Gold Comet. I built log bunks, head ache rack and the stinger trailer to come up with this.






















I've always had a love affair with the pre and post war Chevy truck. My neighbor has two of them parked behind his house. It was great when Clare Gilbert at Sylvan Scale came up with this cab. Funny thing is, now Classic Metal Works and adp of Germany also have a model of this truck but neither is as prototypically accurate or close to scale as Clare's offering. Not only that but Clare has given us the model in a cabover configuration too. Which is what I used here for this pumper unit. I tried to stay true to the Art Deco form here with a scratch built bed. Many of the details are scratch built with some help from Ralph Ratcliffe models fender mounted siren.



We I've got lots more to show but that's it for now. I'd like to take this opportunity to express my thanks to all those that have wished us well and given their prayers and condolences following the tragedy that befell our family. It's all of those kind words from you folks that have helped immensely to overcome what I thought was the end to the happiness and enjoyment life can offer. The realization that so many good hearts exist out there has given me the desire to participate in life again. Many thanks to each and every one.

Christiana

Christiana Fesmire
12/17/88 - 7/1/11

The beautiful young lady above is the youngest of our four children. On July first of this year Christiana Fesmire disappeared with no explanation. We spent the next few months in deep despair and in constant prayer. We received a call from the Lewiston, Maine police detective Roland Godbout in October, wanting to meet with us. It was then that we were informed that a man had been arrested and charged with her brutal murder. We know not why exactly, only that he was her neighbor and that they had not gotten along very well. Her remains have yet to be found.


It is obvious from her photo, that she was of rare and stunning beauty. What cannot be seen is the vibrant personality and happy outlook on life that she possessed. Her constant smile and love for snowboarding, bicycling and her family have been taken from her now and these are sorely missed by everyone who knew her. I wish to thank everyone for the outpouring of sympathy that the family has received.

Please forgive me for placing this tragedy before you in this otherwise positive look into an activity I have loved and enjoyed presenting to you. But I need to put my hobby in the back seat of my life for a while. I'm sure I will return to it someday so until then be patient. In the meantime, please say a prayer for our little one that her soul is at peace. We miss her immensely.

11/17/12
Update:  This is to inform all those who have so considerately offered their condolences at our loss, that on Friday, November 16, 2012, Buddy Robinson was found guilty in the murder of our youngest child, Christiana. It does not do anything to comfort us in our loss but does provide us one more element of closure to this tragedy. Many thanks for the diligence of local and state law enforcement agencies and the Maine Attorney General's Office in the successful prosecution. Our only hope for Mr. Robinson is that he will share in our sorrow at his actions of July 1, 2011 and that it will permeate his daily thoughts as it does ours. He has not yet been sentenced and Christiana's remains are still not found.

12/6/12

Update: Body found. It seems that upon his conviction, Mr. Robinson wished to do something to get a reduced sentence. His legal council advised him to give up the whereabouts of Christiana's remains. After agreeing to a sentence of 40 years with the State's Attorney General's  Office, he gave police the exact location. She was found only a few hundred feet from the intersection of Wagg and Ferry Rds. in Lisbon, Maine in a heavily wooded area. State Police forensics will be making an official identification and trying to determine a cause of death. We are grateful at this discovery and hope to have Christiana in her final resting place in a family plot at Maple Grove Cemetery near Round Pond, Maine. May she now rest in peace.

10/18/13

   Update: It's been over two years now since learning of the tragic fate of our little girl. The judicial system here in Maine is quite slow but finally today, sentencing was pronounced for our daughter's murderer, Buddy Robinson. Even today, Mr. Robinson offered no apologies for his actions and supplied the court with a ten minute rant on what a great guy he was. The judge, Justice Kennedy was not impressed with his speech and was actually annoyed at his inability to offer a reason or apology for what he did. It was for this reason that she decided to up the sentence that the District Attorney and defense attorney agreed upon of 40 years to 55 years. We are grateful for her ability to see clearly that just because Buddy Robinson seems to be a well mannered, polite young man, doesn't mean that there aren't well mannered, polite murderers walking the face of the earth. Our experience now with the courts, law enforcement and the media is now over and we look forward to revisiting Christiana in a positive, loving manner.   May she live on in our memories and be happy wherever she may be.