For Sale!

It's my pleasure to say that response here has been just overwhelming. In just the few days that I have had these models up for sale, I have sold all but the remaining and there is an interest in them already. So please be patient, I will need a little time to get more stuff together to place here. Keep looking back and I hope to have more soon.

I've been selling my models on ebay for some time now with mixed results. I'm often surprised at a very generous bid on something I'm just not that crazy about or doesn't perhaps have a lot into it. I'm equally surprised at pieces that I have poured my heart into and spent many hours getting what I feel is a super model (two words here) and have it command much less than expected. Be that as it may, I enjoy the building process and what I gain in money usually goes back into modeling supplies. The thought of my models being in collections and layouts all over the world intrigues me to no end and is very gratifying to say the least. It satisfies the spiritual side in a way, the knowledge that folks from every part of the globe appreciate what it is that I have decided to fill the hours of my leisure. And in an attempt to be able to present a model in a more personal setting, I've decided to place a few here.
So let's get the transactional verbiage out of the way and then I'll get on with trying to separate you from your shekels. After receiving my first inquiry about the sale of a model, it occurred to me that one must leave some contact information. So please either leave an email address or contact me directly at cfesmire@midcoast.com , thanks. I accept Paypal only, merely as a convenience and because I can get one's model to them in a more timely fashion. Upon receipt of payment the model will go out that week. Shipping costs to the Continental U.S. and Canada for vehicles and packages under 1 lb. is $5.00 straight across the board. Any different will be noted in the model description. Shipping elsewhere in the world will be computed when any request is made. My return policy is this: if there's something wrong with the model when it arrives at your location, I will buy it back, and pay the return shipping as well. All that I ask is that you confirm this somehow either in an email attachment or a mailed photo. I want you to be happy with what you receive from me.

I will also do commissioned work with a caveat. If you show me a photo and say that's the vehicle I want, I may exercise some "artistic license" on the resulting model. Not always is an exact year, make or model of a vehicle available. And often certain accessories that can't be scratch built or available are not to be had either. The result is either no model or a compromise in which I would discuss it with the potential buyer prior to any agreement. I will estimate any model cost before hand and will stay true to that figure unless changes are requested by the buyer during construction. None of this is meant to scare you away from having me build a custom piece for you but just to keep everyone happy knowing what is what.
I'll be removing models on display as (and if) the are sold, and adding new one's as I choose so hopefully this thread will be an active one. A comment left will be promptly replied to whether it's just a question or a purchase.

1930's tractor trailer - $55.00




Another of the Roco Zis-5's this time in a highway tractor with integral sleeper. The cab has been extended and running lights and horn have been added. The trailer is an exterior post round front suitable for the 30's. It comes from a Sylvan Scale resin kit and all have been moderately weathered.


Ford Model AA canopy express - $34.00


This is a modified Busch Model AA closed van with the sides removed and rolled up canvas added. The exposed flat head engine and headlamps come from Jordan Miniatures.














Steam launch diorama - SOLD
1930's transfer/express truck - SOLD






Small Crawler diorama - Sold





1947 Ford cab over tow truck - SOLD



Ford Model A pickup - SOLD


Ford Model AA flatbed - Sold




1953 Ford F 600 wrecker - Sold



1930 Autocar w. lowboy and shovel - SOLD

Roadside Advertisement display - SOLD

1937 Chevy pickup mini diorama - SOLD


International KB11 logging truck - SOLD



1937 Ford cabover - SOLD



Mack BX dump - SOLD


1965 Ford F850 hay/straw truck with load - SOLD

Ford AA wrecker: SOLD

1937 Chevy wrecker - SOLD

IH F230 - SOLD



Pair of 1940 Fords with hood - SOLD
Don't forget that clicking on these photos that accompany the text will bring up a larger picture. Please excuse the long loading times when clicking back to the blog. I will be putting fewer blogs on the same page to try to speed up loading times. Thanks.

airing some thoughts

I guess it's about time to get a little philosophical about my modeling and any other subject I deem appropriate for here. After all, and with deference to Leslie Gore, "it's my blog and I'll do what I want to". There's a lot that crosses my mind as I'm working on a build not the least of which is what I want the piece to turn out being. Often, as in life in general, 'the best laid plans.....' , or as some would say, Murphy's Law kicks in. Anything can change at a moments notice and alter the finest of intentions. This happens all too frequently in my modeling and I'm sure I'm not alone in sharing this fate. I try to insure against mistakes and what I like to refer to as 'material failure' and as I grow in my modeling, these mistakes become fewer. I have learned especially to take more time with things and have learned to recognize the limiting properties of materials (and myself, in the immortal words of Dirty Harry "a man's got to know his limitations"). Learning by experience to make different choices in techniques and materials from those that I first started using has been augmented with advice and tutorials from all different modeling genres. I've mentioned that military modelers have had a profound impression on my weathering before and larger scale vehicle modelers are very adept at scratch building and kit bashing. Model railroaders and diorama builders look at the world of miniatures in a completely different way and come up with techniques and practices that can benefit any kind of modeler. I have developed, at the very least into a good student (where was this propensity 50 years ago?)


Above you will notice a model of a 1940 Ford coupe. On seeing how larger scale modelers grind out the insides of a model to represent the cancerous rust around fenders and also how they make dented looking sheet metal, I decided to try some of their techniques on a 1/87 scale model. The base model here is a really awful injected molded piece from an outfit called Herka but the casting has been done by several others, most notable Tyco. The details are lacking and what is there can at best be considered barely acceptable but the initial shape, proportion and scale accuracy is pretty good. I cut the hood and grille area out and had to carve the headlight bezels into the front fenders. The engine, firewall and radiator came from the '40 Ford sedan model kit by Jordan. I wish I had a bunch of these little flathead V8's to fool around with.


You might remember my Model AA stake bed that has an exposed engine too. It's at this point in the writing that I realize that there is going to be a theme to the photos I show. Let's see what I come up with in showing the power plants on some of my models. Revealing the inner workings, so to speak. The Model AA motor is again a Jordan piece, this one from the deuce coupe kit they make. The photo below showing what the intended model for that motor is. All spiffed up with an Alcad 2 paint job. If I hadn't mentioned it before, this Alclad product is a super chrome finish. One needs to put down a good smooth black enamel finish on whatever you want chromed and then a very light coat of the Alclad 2 finish goes on. The Alclad is a lacquer based product and in effect dissolves a portion of the underlying black enamel to combine for a bright chrome.


I hearken back now to the days before I started weathering everything I built. This resides in a collection of another fellow and he did not want any weathering on it anyway. It is a resin model of a Kenworth C540 oilfield tractor. The model is from Diesel 87 and is quite nice with some photo etched details but a very heavy price tag. In kit form, it retails for $150.00. Add what I charged the gentleman to construct the model. It is a very impressive machine even in 1/87 scale though. The kit included the engine so as to be able to model it sans hood or covered. I added the steering column.
The Alloy Forms Constructor was in my post on dump trucks. The engine shown is the diesel 6 from the Herpa/Promotex Mack CH. You will notice some piping and a steering column added to the engine compartment here.


I haven't yet shown this next piece yet mostly because I have yet to get a photo that accurately displays the truck. For some reason the color or intensity of particular features of the truck just come out all wrong. I'll risk showing it anyway since it is a real nice model kit and the truck itself is a beaut. The resin kit comes from Don Mills models and is of the Mack FCSW quarry truck with chain drive.


Some time ago, I was given a super nice resin casting of the Cat c12 diesel motor with tranny. I couldn't figure out (or haven't yet) how to use this really great little model in a truck. But I did have the opportunity to utilize the transmission part to get a nice detailed look to the back side of the International Emeryville. Both the Cat engine and the Emeryville were graciously given to me by Bob Johnson.



One more example of the inner workings of a vehicle in this model that you have seen several variations on already in past postings. The Bucyrus Erie B2 steam units from Vintage Vehicles I've done without the cabin housing since the details on the boiler and engines is so nice. I made the piece on the left into a shallow dredging barge. And the right photo shows a lattice boom crane version.













Well I hope I didn't embarrass anyone with all this exposure. Perhaps I will cover up better next time.




And if I don't get back to this in the next few weeks, please all have a safe and enjoyable Holiday Season. Merry Christmas and Happy New Year 2009.

Where's the beef?

Since I just finished this latest diorama, I thought I would share it with you. It's based on a laser cut wood structure kit (my first actually) from Durango Press that they refer to as the newspaper office. Having scratch built many of my structures and used several different plastic kits, I wanted to go with an inexpensive laser wood kit for my first. I wasn't quite sure I would like them and to be quite frank, I'm not terribly enthused. Don't get me wrong, the kit was fine and turned out pretty good but I felt a bit constricted in just what it was I could do with it and the tolerances aren't what I myself like to deal with. Be that as it may, I had some fun with it and I hope you enjoy the end result. This is the photo that comes on the box to give you an idea of the manufacturers intentions.


The first step I took was to layout the building on a piece of 1/4" plywood, size the wood and seal it with shellac. I decided to do a butcher shop and use the small shed addition for a smokehouse building separate from the main structure. The next decision was to create a different elevation in the rear by making the basement a walkout. I used Evergreen styrene brick wall for foundations and added the window and doors to make it a walkout. By shaping and gluing 1" extruded styrofoam insulation board I was able to make the elevations for this configuration. As you can see, I've already assembled and braced the main structure and cut the foundation walls here but everything is just dry stacked for the moment.



At this point I know my footprint sizes so I am able to do some grading with plaster. Normally I like to paint the dried and shaped plaster with a dark color but all I had was red primer so this is what you see in the next photo. I've also finished building a door from wood and added the window to the brickwork. The sharp drop in grade between the buildings has had a retaining wall built from cut linoleum flooring. I individually painted the bricks to give a slight variation to the color and washed it with an acrylic linen white for the mortar joints. The doors have been distressed with a razor saw and washed with a rather thick wash of RR Tie brown acrylic then weathered with chalks.










I proceeded to tackle the small smokehouse then and used the same painting method as on the other brick. It has a corrugated steel roof on it and the sidewalls were weathered using the RR Tie brown with a wash of red chalk dissolved in alcohol. You'll notice some ground cover here that I put down that consists of a screened gravel I acquire from well drilling spoils. The roof is a bit too orange in this photo and you will see that I toned it down later. I put a wood jamb for the upper door and used another piece of corrugation for it and just boarded the window over.














Now was the time to do a little sceniking with Woodland Scenics coarse grass and a lot of natural materials. I'm always anxious to get to the point that I "plant" my structures permanently. After doing the signage on the front of the shop and installing the windows and tab shingle roof, I was ready. And with some additional details like a wood pile and some obligatory junk laying around I took it outside for the next photos.


Now I'm one that can't leave well enough alone. I just had to keep moving on this diorama since I saw so much potential for super detailing further. Everything else you are about to see makes up what I hope is the finished product. I've utilized several of the vehicles I already have built like the telephone pole truck, Ford Model AA stakebody and '37 Chevy panel truck and added a recently completed 1926 Essex coach. The butcher carrying a hind quarter (with newly added apron), pole crew, sheep and stuffy lady going into the shop to place an order were the last to be done to the diorama. How about a bunch of finished pics?

I dedicated this butcher shop diorama to Ken Hamilton whom has been a tremendous inspiration over the years with his phenomenal skills and generous advice. I only wish that my work can be nearly as good as his some day. It is my hope that this has been the least bit entertaining and I appreciate your time in viewing. And to all of you that have left your nice comments I will say thanks. Please know that they are truly valued.

tanks a lot

I suppose looking at the prices on the gas pumps the other day made me think of this one. No matter what the liquid is that we are in contact daily with, usually was in a tanker of some sort or another at one time. Even water is either transported by tanker or used from a tanker like in the example above of the '56 Chevy LCF that is similar to many fire department tanker unit from back then. The resin cab for this truck was placed on a Roco military chassis and made to look like the old 4 wheel drive conversions back then by Marmon-Harrington Corp. The tank itself ironically is made from a cigarette lighter that I made bunks for to fit on the chassis.


Of course tankers are most well known for hauling fuel as is the case with the unit being hauled here by a Mack Vision with flat top sleeper. The tanker is from Promotex and has merely been repainted and detailed.


Way back when, food related liquids were almost always hauled in wooden tanks. The truck above was modeled after a cider/vinegar transport truck. The truck itself is a 1922 Packard and the tank is modeled with Manila paper wrapped around a wooden dowel.


I knew I'd get around to showing more of that 1930's truck that I made so many versions of in an earlier posting. Here's one more in the form of a tanker. The tank was made this time by wrapping a dowel with sheet brass and a pair of wire bands.



If you remember seeing the movie "Duel" then you might recognize the Peterbilt 281 above that chased Dennis Weaver all over the desert in his poor little red Valiant. This model took some doing by adding 6 scale inches to the height of an inexpensive Imex Pete and cutting out the heavy window glazing that comes with the original model. Then the grille was scratch built and it was fit onto a customized chassis and all the details such as fuel tanks, steps, wheels/tires and mirrors were added. The trailer is an old Wiking piece that I added the tool/chain box to and all was heavily weathered. I love these old Petes and when I drove a truck, it was one similar to this.


The Peterbilt above is a rather unusual truck. It is a fuel and lube truck that would be in service supplying fuel, lubricants and hydraulic fluids to large equipment that cannot be driven back to a fuel and service facility. The spent fluids would also be carried away with a truck like this. The model itself is the Wiking Peterbilt and the tanker bed is from a train load that has been detailed.








To the left above is another of the Sheepscot International R180's in a highway tractor pulling a fuel tanker similar to the one on the Duel Pete. On the right is the same Sheepscot R 180 cab this time in a milk tanker. The body on this is also from Sheepscot and is cast plaster. Two very distinctively different trucks using the same cab.



Often a piece designed for the military is quite suitable for civilian use as is the case above with the Oshkosh tanker. More commonly known as a HEMTT this model is from the Roco Miniatur civilian line and is painted to represent an airfield refueler.












We'll be entering the area of fantasy for this next piece as I don't believe anything like this ever really existed. But I loved the truck and wanted to do something really different with it. The Henschel is a German truck from the 30's that is shown here in an airfield fire/rescue unit that has been with hyrail wheels. Perhaps there was a large enough industrial facility to once need something like this but who cares really. I just like it.



Lastly I'm going to come around full circle and show another Chevrolet fire department tanker from 1956. This one is a resin casting of the Wiking Chevy that has been sitting roadside for many years.

Well again it's been my pleasure to show some of my builds to you all and I hope you enjoyed. Tanks again.