Sunday, October 19, 2008

tanks a lot


I suppose looking at the prices on the gas pumps the other day made me think of this one. No matter what the liquid is that we are in contact daily with, usually was in a tanker of some sort or another at one time. Even water is either transported by tanker or used from a tanker like in the example above of the '56 Chevy LCF that is similar to many fire department tanker unit from back then. The resin cab for this truck was placed on a Roco military chassis and made to look like the old 4 wheel drive conversions back then by Marmon-Harrington Corp. The tank itself ironically is made from a cigarette lighter that I made bunks for to fit on the chassis.


Of course tankers are most well known for hauling fuel as is the case with the unit being hauled here by a Mack Vision with flat top sleeper. The tanker is from Promotex and has merely been repainted and detailed.


Way back when, food related liquids were almost always hauled in wooden tanks. The truck above was modeled after a cider/vinegar transport truck. The truck itself is a 1922 Packard and the tank is modeled with Manila paper wrapped around a wooden dowel.


I knew I'd get around to showing more of that 1930's truck that I made so many versions of in an earlier posting. Here's one more in the form of a tanker. The tank was made this time by wrapping a dowel with sheet brass and a pair of wire bands.



If you remember seeing the movie "Duel" then you might recognize the Peterbilt 281 above that chased Dennis Weaver all over the desert in his poor little red Valiant. This model took some doing by adding 6 scale inches to the height of an inexpensive Imex Pete and cutting out the heavy window glazing that comes with the original model. Then the grille was scratch built and it was fit onto a customized chassis and all the details such as fuel tanks, steps, wheels/tires and mirrors were added. The trailer is an old Wiking piece that I added the tool/chain box to and all was heavily weathered. I love these old Petes and when I drove a truck, it was one similar to this.


The Peterbilt above is a rather unusual truck. It is a fuel and lube truck that would be in service supplying fuel, lubricants and hydraulic fluids to large equipment that cannot be driven back to a fuel and service facility. The spent fluids would also be carried away with a truck like this. The model itself is the Wiking Peterbilt and the tanker bed is from a train load that has been detailed.








To the left above is another of the Sheepscot International R180's in a highway tractor pulling a fuel tanker similar to the one on the Duel Pete. On the right is the same Sheepscot R 180 cab this time in a milk tanker. The body on this is also from Sheepscot and is cast plaster. Two very distinctively different trucks using the same cab.



Often a piece designed for the military is quite suitable for civilian use as is the case above with the Oshkosh tanker. More commonly known as a HEMTT this model is from the Roco Miniatur civilian line and is painted to represent an airfield refueler.












We'll be entering the area of fantasy for this next piece as I don't believe anything like this ever really existed. But I loved the truck and wanted to do something really different with it. The Henschel is a German truck from the 30's that is shown here in an airfield fire/rescue unit that has been with hyrail wheels. Perhaps there was a large enough industrial facility to once need something like this but who cares really. I just like it.



Lastly I'm going to come around full circle and show another Chevrolet fire department tanker from 1956. This one is a resin casting of the Wiking Chevy that has been sitting roadside for many years.

Well again it's been my pleasure to show some of my builds to you all and I hope you enjoyed. Tanks again.

3 comments:

John Dovak said...

Hey Chester, love your new site and the spread on tankers! I've been wanting to build a milk hauler like these for some time. Got any idea what I might use for a tank?

http://s34.photobucket.com/albums/d118/jdovak4/milk%20tanker/

John Dovak
jdovak4@insightbb.com

Anonymous said...

Chester, nice work. What did you use for the tarp over the front of the fire truck?

chester said...

Thanks for the nice comments guys.
Ed, the tarp is 2 ply toilet paper that I separate into 1 ply. I lay the precut piece over the model and touch it with a brush loaded with a 50/50 mixture of glue and in this case water from my brush cleaning. Let dry and more painting or chalks can be done if necessary.